from ....Internal.Core import Core
from ....Internal.CommandsGroup import CommandsGroup
from ....Internal.StructBase import StructBase
from ....Internal.ArgStruct import ArgStruct
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]class PhDhsDpcch:
"""PhDhsDpcch commands group definition. 3 total commands, 0 Sub-groups, 3 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._base = CommandsGroup("phDhsDpcch", core, parent)
# noinspection PyTypeChecker
[docs] class CalculateStruct(StructBase):
"""Response structure. Fields: \n
- Reliability: int: decimal 'Reliability Indicator'
- Overall_Max_Ph_D: float: No parameter help available
- Measure_Points: float: No parameter help available
- Count_Dyn_Limit: float: decimal Number of results exceeding the limit Range: 0 to 99999999
- Ratio_Dyn_Limit: float: float Percentage of results exceeding the limit Range: 0 % to 100 %, Unit: %
- Meas_Point_Acurr: float: No parameter help available
- Meas_Point_Amax: float: No parameter help available
- Meas_Point_Bcurr: float: No parameter help available
- Meas_Point_Bmax: float: No parameter help available"""
__meta_args_list = [
ArgStruct.scalar_int('Reliability', 'Reliability'),
ArgStruct.scalar_float('Overall_Max_Ph_D'),
ArgStruct.scalar_float('Measure_Points'),
ArgStruct.scalar_float('Count_Dyn_Limit'),
ArgStruct.scalar_float('Ratio_Dyn_Limit'),
ArgStruct.scalar_float('Meas_Point_Acurr'),
ArgStruct.scalar_float('Meas_Point_Amax'),
ArgStruct.scalar_float('Meas_Point_Bcurr'),
ArgStruct.scalar_float('Meas_Point_Bmax')]
def __init__(self):
StructBase.__init__(self, self)
self.Reliability: int = None
self.Overall_Max_Ph_D: float = None
self.Measure_Points: float = None
self.Count_Dyn_Limit: float = None
self.Ratio_Dyn_Limit: float = None
self.Meas_Point_Acurr: float = None
self.Meas_Point_Amax: float = None
self.Meas_Point_Bcurr: float = None
self.Meas_Point_Bmax: float = None
[docs] def calculate(self) -> CalculateStruct:
"""SCPI: CALCulate:WCDMa:MEASurement<instance>:MEValuation:MODulation:PHDHsdpcch \n
Snippet: value: CalculateStruct = driver.multiEval.modulation.phDhsDpcch.calculate() \n
Returns the phase discontinuity HS-DPCCH single value results for signals with HS-DPCCH. The results depend on the
dynamic limit and points A and B (see method RsCmwWcdmaMeas.Configure.MultiEval.Limit.phsDpcch) . See also 'Detailed
Views: Phase Discontinuity' The values described below are returned by FETCh and READ commands. CALCulate commands return
limit check results instead, one value for each result listed below. \n
:return: structure: for return value, see the help for CalculateStruct structure arguments."""
return self._core.io.query_struct(f'CALCulate:WCDMa:MEASurement<Instance>:MEValuation:MODulation:PHDHsdpcch?', self.__class__.CalculateStruct())
# noinspection PyTypeChecker
[docs] class ResultData(StructBase):
"""Response structure. Fields: \n
- Reliability: int: decimal 'Reliability Indicator'
- Overall_Max_Ph_D: float: No parameter help available
- Measure_Points: int: No parameter help available
- Count_Dyn_Limit: int: decimal Number of results exceeding the limit Range: 0 to 99999999
- Ratio_Dyn_Limit: float: float Percentage of results exceeding the limit Range: 0 % to 100 %, Unit: %
- Meas_Point_Acurr: float: No parameter help available
- Meas_Point_Amax: float: No parameter help available
- Meas_Point_Bcurr: float: No parameter help available
- Meas_Point_Bmax: float: No parameter help available"""
__meta_args_list = [
ArgStruct.scalar_int('Reliability', 'Reliability'),
ArgStruct.scalar_float('Overall_Max_Ph_D'),
ArgStruct.scalar_int('Measure_Points'),
ArgStruct.scalar_int('Count_Dyn_Limit'),
ArgStruct.scalar_float('Ratio_Dyn_Limit'),
ArgStruct.scalar_float('Meas_Point_Acurr'),
ArgStruct.scalar_float('Meas_Point_Amax'),
ArgStruct.scalar_float('Meas_Point_Bcurr'),
ArgStruct.scalar_float('Meas_Point_Bmax')]
def __init__(self):
StructBase.__init__(self, self)
self.Reliability: int = None
self.Overall_Max_Ph_D: float = None
self.Measure_Points: int = None
self.Count_Dyn_Limit: int = None
self.Ratio_Dyn_Limit: float = None
self.Meas_Point_Acurr: float = None
self.Meas_Point_Amax: float = None
self.Meas_Point_Bcurr: float = None
self.Meas_Point_Bmax: float = None
[docs] def read(self) -> ResultData:
"""SCPI: READ:WCDMa:MEASurement<instance>:MEValuation:MODulation:PHDHsdpcch \n
Snippet: value: ResultData = driver.multiEval.modulation.phDhsDpcch.read() \n
Returns the phase discontinuity HS-DPCCH single value results for signals with HS-DPCCH. The results depend on the
dynamic limit and points A and B (see method RsCmwWcdmaMeas.Configure.MultiEval.Limit.phsDpcch) . See also 'Detailed
Views: Phase Discontinuity' The values described below are returned by FETCh and READ commands. CALCulate commands return
limit check results instead, one value for each result listed below. \n
:return: structure: for return value, see the help for ResultData structure arguments."""
return self._core.io.query_struct(f'READ:WCDMa:MEASurement<Instance>:MEValuation:MODulation:PHDHsdpcch?', self.__class__.ResultData())
[docs] def fetch(self) -> ResultData:
"""SCPI: FETCh:WCDMa:MEASurement<instance>:MEValuation:MODulation:PHDHsdpcch \n
Snippet: value: ResultData = driver.multiEval.modulation.phDhsDpcch.fetch() \n
Returns the phase discontinuity HS-DPCCH single value results for signals with HS-DPCCH. The results depend on the
dynamic limit and points A and B (see method RsCmwWcdmaMeas.Configure.MultiEval.Limit.phsDpcch) . See also 'Detailed
Views: Phase Discontinuity' The values described below are returned by FETCh and READ commands. CALCulate commands return
limit check results instead, one value for each result listed below. \n
:return: structure: for return value, see the help for ResultData structure arguments."""
return self._core.io.query_struct(f'FETCh:WCDMa:MEASurement<Instance>:MEValuation:MODulation:PHDHsdpcch?', self.__class__.ResultData())