from ....Internal.Core import Core
from ....Internal.CommandsGroup import CommandsGroup
from ....Internal import Conversions
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]class Dhib:
"""Dhib commands group definition. 3 total commands, 0 Sub-groups, 3 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._base = CommandsGroup("dhib", core, parent)
[docs] def get_mlength(self) -> int:
"""SCPI: CONFigure:WCDMa:MEASurement<instance>:TPC:DHIB:MLENgth \n
Snippet: value: int = driver.configure.tpc.dhib.get_mlength() \n
Defines the number of slots to be measured in 'DC HSDPA In-Band Emission' mode. \n
:return: meas_length: numeric Range: 1 to 20, Unit: slots
"""
response = self._core.io.query_str('CONFigure:WCDMa:MEASurement<Instance>:TPC:DHIB:MLENgth?')
return Conversions.str_to_int(response)
[docs] def set_mlength(self, meas_length: int) -> None:
"""SCPI: CONFigure:WCDMa:MEASurement<instance>:TPC:DHIB:MLENgth \n
Snippet: driver.configure.tpc.dhib.set_mlength(meas_length = 1) \n
Defines the number of slots to be measured in 'DC HSDPA In-Band Emission' mode. \n
:param meas_length: numeric Range: 1 to 20, Unit: slots
"""
param = Conversions.decimal_value_to_str(meas_length)
self._core.io.write(f'CONFigure:WCDMa:MEASurement<Instance>:TPC:DHIB:MLENgth {param}')
[docs] def get_pattern(self) -> float:
"""SCPI: CONFigure:WCDMa:MEASurement<instance>:TPC:DHIB:PATTern \n
Snippet: value: float = driver.configure.tpc.dhib.get_pattern() \n
Specifies the pattern and in the same time also the carrier to be tested. Select the pattern 00... for the tested carrier
and 11... for the other carrier. \n
:return: pattern: numeric | UD | DU UD: C1: 11... C2: 00... DU: C1: 00... C2: 11...
"""
response = self._core.io.query_str('CONFigure:WCDMa:MEASurement<Instance>:TPC:DHIB:PATTern?')
return Conversions.str_to_float(response)
[docs] def set_pattern(self, pattern: float) -> None:
"""SCPI: CONFigure:WCDMa:MEASurement<instance>:TPC:DHIB:PATTern \n
Snippet: driver.configure.tpc.dhib.set_pattern(pattern = 1.0) \n
Specifies the pattern and in the same time also the carrier to be tested. Select the pattern 00... for the tested carrier
and 11... for the other carrier. \n
:param pattern: numeric | UD | DU UD: C1: 11... C2: 00... DU: C1: 00... C2: 11...
"""
param = Conversions.decimal_value_to_str(pattern)
self._core.io.write(f'CONFigure:WCDMa:MEASurement<Instance>:TPC:DHIB:PATTern {param}')
[docs] def get_aexecution(self) -> bool:
"""SCPI: CONFigure:WCDMa:MEASurement<instance>:TPC:DHIB:AEXecution \n
Snippet: value: bool = driver.configure.tpc.dhib.get_aexecution() \n
Enables or disables automatic execution of the TPC setup for combined signal path measurements in 'In-band Emission' mode. \n
:return: enable: OFF | ON
"""
response = self._core.io.query_str('CONFigure:WCDMa:MEASurement<Instance>:TPC:DHIB:AEXecution?')
return Conversions.str_to_bool(response)
[docs] def set_aexecution(self, enable: bool) -> None:
"""SCPI: CONFigure:WCDMa:MEASurement<instance>:TPC:DHIB:AEXecution \n
Snippet: driver.configure.tpc.dhib.set_aexecution(enable = False) \n
Enables or disables automatic execution of the TPC setup for combined signal path measurements in 'In-band Emission' mode. \n
:param enable: OFF | ON
"""
param = Conversions.bool_to_str(enable)
self._core.io.write(f'CONFigure:WCDMa:MEASurement<Instance>:TPC:DHIB:AEXecution {param}')