Maximum¶
SCPI Commands
READ:WCDMa:MEASurement<Instance>:TPC:DHIB:MAXimum
FETCh:WCDMa:MEASurement<Instance>:TPC:DHIB:MAXimum
CALCulate:WCDMa:MEASurement<Instance>:TPC:DHIB:MAXimum
- class Maximum[source]
Maximum commands group definition. 3 total commands, 0 Sub-groups, 3 group commands
- class CalculateStruct[source]
Response structure. Fields:
Reliability: int: decimal ‘Reliability Indicator’
Carrier_Ch_Power: float: float Level of the uplink carrier, where the UE transmits at the maximal output power Range: -100 dBm to 40 dBm, Unit: dBm
Inband_Emission: float: float Relative level of the other uplink carrier transmitting at minimal output power Range: -99 dB to 99 dB, Unit: dB
- class ResultData[source]
Response structure. Fields:
Reliability: int: decimal ‘Reliability Indicator’
Carrier_Ch_Power: float: float Level of the uplink carrier, where the UE transmits at the maximal output power Range: -100 dBm to 40 dBm, Unit: dBm
Inband_Emission: float: float Relative level of the other uplink carrier transmitting at minimal output power Range: -99 dB to 99 dB, Unit: dB
- calculate() → CalculateStruct[source]
# SCPI: CALCulate:WCDMa:MEASurement<instance>:TPC:DHIB:MAXimum value: CalculateStruct = driver.tpc.dhib.maximum.calculate()
Return the dual carrier in-band emission results. The minimum, maximum and average results can be retrieved. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
- return
structure: for return value, see the help for CalculateStruct structure arguments.
- fetch() → ResultData[source]
# SCPI: FETCh:WCDMa:MEASurement<instance>:TPC:DHIB:MAXimum value: ResultData = driver.tpc.dhib.maximum.fetch()
Return the dual carrier in-band emission results. The minimum, maximum and average results can be retrieved. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
- return
structure: for return value, see the help for ResultData structure arguments.
- read() → ResultData[source]
# SCPI: READ:WCDMa:MEASurement<instance>:TPC:DHIB:MAXimum value: ResultData = driver.tpc.dhib.maximum.read()
Return the dual carrier in-band emission results. The minimum, maximum and average results can be retrieved. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
- return
structure: for return value, see the help for ResultData structure arguments.