Average¶
SCPI Commands
READ:WCDMa:MEASurement<Instance>:MEValuation:CARRier<Carrier>:TRACe:CDPower:DPDCh:AVERage
FETCh:WCDMa:MEASurement<Instance>:MEValuation:CARRier<Carrier>:TRACe:CDPower:DPDCh:AVERage
- class Average[source]
Average commands group definition. 2 total commands, 0 Sub-groups, 2 group commands
- fetch(carrier=<Carrier.Default: -1>) → List[float][source]
# SCPI: FETCh:WCDMa:MEASurement<instance>:MEValuation:CARRier<carrier>:TRACe:CDPower:DPDCh:AVERage value: List[float] = driver.multiEval.carrier.trace.cdPower.dpdch.average.fetch(carrier = repcap.Carrier.Default)
Returns the values of the RMS CDP vs. slot traces for the DPCCH and the DPDCH. Each current value is averaged over a half-slot or a full-slot, depending on the measurement period (see method RsCmwWcdmaMeas.Configure.MultiEval.Mperiod. modulation) . The number of results depends on the measurement length (see method RsCmwWcdmaMeas.Configure.MultiEval. msCount) . The results of the current, average, minimum, maximum and standard deviation traces can be retrieved. The standard deviation traces cannot be displayed at the GUI. See also ‘Detailed Views: Modulation, CDP and CDE’
Use RsCmwWcdmaMeas.reliability.last_value to read the updated reliability indicator.
- param carrier
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Carrier’)
- return
dpdch: No help available
- read(carrier=<Carrier.Default: -1>) → List[float][source]
# SCPI: READ:WCDMa:MEASurement<instance>:MEValuation:CARRier<carrier>:TRACe:CDPower:DPDCh:AVERage value: List[float] = driver.multiEval.carrier.trace.cdPower.dpdch.average.read(carrier = repcap.Carrier.Default)
Returns the values of the RMS CDP vs. slot traces for the DPCCH and the DPDCH. Each current value is averaged over a half-slot or a full-slot, depending on the measurement period (see method RsCmwWcdmaMeas.Configure.MultiEval.Mperiod. modulation) . The number of results depends on the measurement length (see method RsCmwWcdmaMeas.Configure.MultiEval. msCount) . The results of the current, average, minimum, maximum and standard deviation traces can be retrieved. The standard deviation traces cannot be displayed at the GUI. See also ‘Detailed Views: Modulation, CDP and CDE’
Use RsCmwWcdmaMeas.reliability.last_value to read the updated reliability indicator.
- param carrier
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Carrier’)
- return
dpdch: No help available