RcdError

SCPI Commands

CONFigure:WCDMa:MEASurement<Instance>:MEValuation:LIMit:RCDerror:ECDP

class RcdError

RcdError commands group definition. 8 total commands, 1 Sub-groups, 1 group commands

class EcdpStruct

Structure for reading output parameters. Fields:

• Threshold_Bpsk_1: float: numeric Lower ECDP threshold for BPSK requirement 1 Range: -50 dB to 0 dB, Unit: dB

• Threshold_Bpsk_2: float: numeric Lower ECDP threshold for BPSK requirement 2 Range: -50 dB to 0 dB, Unit: dB

• Limit_Bpsk_1: float: numeric RCDE limit for BPSK requirement 1 Range: -50 dB to 0 dB, Unit: dB

• Limit_Bpks_2: float: numeric RCDE limit for BPSK requirement 2 (limit = this value minus ECDP) Range: -50 dB to 0 dB, Unit: dB

• Threshold_4_Pam_1: float: numeric Lower ECDP threshold for 4PAM requirement 1 Range: -50 dB to 0 dB, Unit: dB

• Threshold_4_Pam_2: float: numeric Lower ECDP threshold for 4PAM requirement 2 Range: -50 dB to 0 dB, Unit: dB

• Limit_4_Pam_1: float: numeric RCDE limit for 4PAM requirement 1 Range: -50 dB to 0 dB, Unit: dB

• Limit_4_Pam_2: float: numeric RCDE limit for 4PAM requirement 2 (limit = this value minus ECDP) Range: -50 dB to 0 dB, Unit: dB

get_ecdp() → EcdpStruct

# SCPI: CONFigure:WCDMa:MEASurement<instance>:MEValuation:LIMit:RCDerror:ECDP
value: EcdpStruct = driver.configure.multiEval.limit.rcdError.get_ecdp()

Defines upper limits for the relative CDE (RCDE) of BPSK and 4PAM modulated channels. For each modulation type, two requirements are defined.

return

structure: for return value, see the help for EcdpStruct structure arguments.

set_ecdp(value: RsCmwWcdmaMeas.Implementations.Configure_.MultiEval_.Limit_.RcdError.RcdError.EcdpStruct) → None

# SCPI: CONFigure:WCDMa:MEASurement<instance>:MEValuation:LIMit:RCDerror:ECDP
driver.configure.multiEval.limit.rcdError.set_ecdp(value = EcdpStruct())

Defines upper limits for the relative CDE (RCDE) of BPSK and 4PAM modulated channels. For each modulation type, two requirements are defined.

param value

see the help for EcdpStruct structure arguments.

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.configure.multiEval.limit.rcdError.clone()

Subgroups

• Eecdp
  • Carrier<Carrier>
    • Edpdch<EdpdChannel>
    • Edpcch
    • Hsdpcch
      • Config
    • Dpdch
    • Dpcch