Average¶
SCPI Commands
FETCh:WCDMa:MEASurement<Instance>:MEValuation:LIST:MODulation:AVERage
- class Average[source]
Average commands group definition. 1 total commands, 0 Sub-groups, 1 group commands
- class FetchStruct[source]
Response structure. Fields:
Reliability: int: decimal ‘Reliability Indicator’ In list mode, a zero reliability indicator indicates that the results in all measured segments are valid. A non-zero value indicates that an error occurred in at least one of the measured segments.
Return_Code: List[int]: decimal Reliability indicator for the segment. The meaning of the returned values is the same as for the common reliability indicator, see previous parameter.
Evm_Rms: List[float]: float Error vector magnitude RMS and peak value Range: 0 % to 100 %, Unit: %
Evm_Peak: List[float]: float Error vector magnitude RMS and peak value Range: 0 % to 100 %, Unit: %
Mag_Error_Rms: List[float]: float Magnitude error RMS value Range: 0 % to 100 %, Unit: %
Mag_Error_Peak: List[float]: float Magnitude error peak value Range: -100 % to 100 % (AVERage: 0% to 100 %, SDEViation: 0 % to 50 %) , Unit: %
Phase_Error_Rms: List[float]: No parameter help available
Phase_Error_Peak: List[float]: No parameter help available
Iq_Offset: List[float]: float I/Q origin offset Range: -100 dB to 0 dB, Unit: dB
Iq_Imbalance: List[float]: float I/Q imbalance Range: -100 dB to 0 dB, Unit: dB
Carrier_Freq_Err: List[float]: float Carrier frequency error Range: -60000 Hz to 60000 Hz, Unit: Hz
Transmit_Time_Err: List[float]: No parameter help available
Ue_Power: List[float]: float User equipment power Range: -100 dBm to 55 dBm, Unit: dBm
- fetch() → FetchStruct[source]
# SCPI: FETCh:WCDMa:MEASurement<instance>:MEValuation:LIST:MODulation:AVERage value: FetchStruct = driver.multiEval.listPy.modulation.average.fetch()
Return modulation single value results in list mode. The values listed below in curly brackets {} are returned for the segments {…}seg 1, {…}seg 2, …, {…}seg n, with n determined by method RsCmwWcdmaMeas.Configure.MultiEval.ListPy. count.
- return
structure: for return value, see the help for FetchStruct structure arguments.